The ultimate orchestra sound app for sophisticated musicians by sound designer Kurt Ader, designed as professional sound module for your iPad, iPhone or iPod touch.
| New version | 2.2 |
| Old version | 2.1.9 |
| Release Notes | This update provides the following corrections and improvements: • Substantial app launch time improvement. • Fixes noise at beginning of new notes that happened under rare situations. • Fixes crash on certain MIDI messages (stand-alone app and Audio Unit). • Audiobus: Fixes connection problem with Audiobus on iOS 14 and higher (see NOTE below).¹ • Audiobus: If session is restored from Audiobus, don’t ask the same question dialog again whether IAA MIDI or IAA MIDI + CoreMIDI shall be used. • IAP downloads: Fixes active download from being interrupted under certain conditions if app was sent into background. • IAP downloads: Fixes active download being restarted under certain conditions after user requested to pause the download. • IAP downloads: Fixes download status being incorrectly shown as “Download Aborted” even though download was auto resumed already. • IAP downloads: Fixes “Download Aborted” and “Resume” button been shown even though the respective sound was already resumed. • IAP downloads: Fixes green arrow animation on progress bar which was stopped if either app went into background or user switched to a different app screen. • IAP downloads: Shows an additional small download progress bar at top edge of screen (iPad only) to make it clear the app is downloading a sound set, even if an already installed sound is currently selected on screen. • IAP downloads: Fixes installation status filter not having used the actual latest installation status of all sound sets (i.e. immediately after download or removal of a sound set). • IAP downloads: Distinguishes now between “Queued for Download” for non-installed sound sets and “Queued for Update” for already installed sets. • Audio Unit UI: Fixes sound selection list from being cropped if AU UI height inside AU host app was rather small. • MIDI recorder: Fixes crash on 2nd iOS “Open with …” request for user imported MIDI files. • MIDI recorder: Supports now MIDI files with “.midi” file extension (instead of being limited to only “.mid”). • Sound selection: Fixes readability issue of placeholder text regarding search filter options if iOS was not running in dark mode. • Volume knob: Shows now that MIDI CC#7 is associated with this control. ¹ NOTE: This version asks you for permission to access the local network, which is required for Audiobus to work on iOS 14 and higher. If you are not using Audiobus you can safely ignore or decline this permission request. You can also grant and revoke this permission under iOS Settings -> “Privacy” -> “Local Network” at any time. |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Strings, Winds |
| Supports | Inter-App Audio (IAA), Audiobus |
Delayrium is a MultiDelay Audio Units PlugIn in parallel approach. It is based on 6 delay line with controls in Time, Time Modulation, Feedback, Panning Modulation and Amplitude Modulation.
| New version | 1.4 |
| Old version | 1.3 |
| Release Notes | - Add AUV3 DelayriumUNUS - Fixed Rate Panning |
| Author | ANTHONY DI FURIA |
| Type | Effect |
| Effect type | Reverb, Delay, Echo |
| Supports | Audio Unit (AU) |
BIAS FX 2 Mobile transforms your mobile device into the ultimate all-in-one guitar effects processor, letting you explore hundreds of premium amps, pedals, and studio racks to create your dream guitar tone.
| New version | 1.3.6 |
| Old version | 1.3.5 |
| Release Notes | Hi there, This update is for fixing some minor issues and stability maintenance. Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Guitar effects |
| Supports | Inter-App Audio (IAA), Audiobus |
BIAS is a professional amp designer, modeler and processor.
| New version | 2.1.13 |
| Old version | 2.1.12 |
| Release Notes | Hi there, This update contains the following changes: - Fixed an issue with Audiobus connection on iOS 14 Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Distortion, Drive etc., Guitar effects |
| Supports | Inter-App Audio (IAA), Audiobus |
WOV for iOS is an AUv3 effect for making a wide range of textures out of your sounds – from familiar tremolo waves to glitchy stutters and everything in between.
| New version | 1.7.2 |
| Old version | 1.6.7 |
| Release Notes | - improved sync with host transport |
| Author | K-Devices |
| Type | Effect |
| Supports | Audio Unit (AU) |
Oriental Strings is a professional sound module app for oriental keyboard players and for musicians who simply want to resemble the typical sound of the Middle East in their songs.
| New version | 2.1 |
| Old version | 2.0.8 |
| Release Notes | This update provides the following corrections and improvements: • Fixes noise at beginning of new notes that happened under rare situations. • Fixes crash on certain MIDI messages (stand-alone app and Audio Unit). • Audiobus: Fixes connection problem with Audiobus on iOS 14 and higher (see NOTE below).¹ • Audiobus: If session is restored from Audiobus, don’t ask the same question dialog again whether IAA MIDI or IAA MIDI + CoreMIDI shall be used. • Audio Unit UI: Fixes sound selection list from being cropped if AU UI height inside AU host app was rather small. • MIDI recorder: Fixes crash on 2nd iOS “Open with …” request for user imported MIDI files. • MIDI recorder: Supports now MIDI files with “.midi” file extension (instead of being limited to only “.mid”). • Sound selection: Fixes readability issue of placeholder text regarding search filter options if iOS was not running in dark mode. • Volume knob: Shows now that MIDI CC#7 is associated with this control. ¹ NOTE: This version asks you for permission to access the local network, which is required for Audiobus to work on iOS 14 and higher. If you are not using Audiobus you can safely ignore or decline this permission request. You can also grant and revoke this permission under iOS Settings -> “Privacy” -> “Local Network” at any time. |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Strings |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Photon is a DMX lighting console for nightclubs, musicians, live events, filmmakers, theaters...
| New version | 1.7.8 |
| Old version | 1.7.7 |
| Release Notes | What's new in v1.7.8 ? * New fixture database synchronization * Bug fixes (iOS12 incompatibility) |
| Author | StudiOS |
| Type | Tool |
| Supports | Ableton Link |
JamUp is delightful way to jam and practice on your iPad and iPhone.
| New version | 3.6.42 |
| Old version | 3.6.41 |
| Release Notes | Hi there, This update is for fixing some minor issues and stability maintenance. Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Equalizer, Filter, Reverb, Delay, Echo, Compressor, Limiter, Gate, Distortion, Drive etc., Modulation effects |
| Supports | Audiobus |
BIAS is an Amp Designer, Modeler and Processor.
| New version | 2.1.13 |
| Old version | 2.1.12 |
| Release Notes | Hi there, This update contains the following changes: - Fixed an issue with Audiobus connection on iOS 14 Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Compressor, Limiter, Gate, Distortion, Drive etc., Guitar effects, Bass effects, Other |
| Supports | Inter-App Audio (IAA), Audiobus |
Play with the sound of a full cathedral organ, created by award-winning sound designer Kurt Ader.
| New version | 2.1 |
| Old version | 2.0.8 |
| Release Notes | This update provides the following corrections and improvements: • Fixes noise at beginning of new notes that happened under rare situations. • Fixes crash on certain MIDI messages (stand-alone app and Audio Unit). • Audiobus: Fixes connection problem with Audiobus on iOS 14 and higher (see NOTE below).¹ • Audiobus: If session is restored from Audiobus, don’t ask the same question dialog again whether IAA MIDI or IAA MIDI + CoreMIDI shall be used. • Audio Unit UI: Fixes sound selection list from being cropped if AU UI height inside AU host app was rather small. • MIDI recorder: Fixes crash on 2nd iOS “Open with …” request for user imported MIDI files. • MIDI recorder: Supports now MIDI files with “.midi” file extension (instead of being limited to only “.mid”). • Volume knob: Shows now that MIDI CC#7 is associated with this control. ¹ NOTE: This version asks you for permission to access the local network, which is required for Audiobus to work on iOS 14 and higher. If you are not using Audiobus you can safely ignore or decline this permission request. You can also grant and revoke this permission under iOS Settings -> “Privacy” -> “Local Network” at any time. |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Complete iOS Guitar Amps and Effects
| New version | 1.9.16 |
| Old version | 1.9.15 |
| Release Notes | Hi there, This update is for fixing some minor issues and stability maintenance. Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Distortion, Drive etc., Guitar effects, All-in-one |
| Supports | Inter-App Audio (IAA) |
This app contains the following instruments: Trumpet, Trombone and Saxophone sampled in four different brass sections.
| New version | 2.1 |
| Old version | 2.0.8 |
| Release Notes | This update provides the following corrections and improvements: • Fixes noise at beginning of new notes that happened under rare situations. • Fixes crash on certain MIDI messages (stand-alone app and Audio Unit). • Audiobus: Fixes connection problem with Audiobus on iOS 14 and higher (see NOTE below).¹ • Audiobus: If session is restored from Audiobus, don’t ask the same question dialog again whether IAA MIDI or IAA MIDI + CoreMIDI shall be used. • Audio Unit UI: Fixes sound selection list from being cropped if AU UI height inside AU host app was rather small. • MIDI recorder: Fixes crash on 2nd iOS “Open with …” request for user imported MIDI files. • MIDI recorder: Supports now MIDI files with “.midi” file extension (instead of being limited to only “.mid”). • Volume knob: Shows now that MIDI CC#7 is associated with this control. ¹ NOTE: This version asks you for permission to access the local network, which is required for Audiobus to work on iOS 14 and higher. If you are not using Audiobus you can safely ignore or decline this permission request. You can also grant and revoke this permission under iOS Settings -> “Privacy” -> “Local Network” at any time. |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Winds |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Colossus Piano sets a new standard in terms of realism, detail and overall quality of piano sounds on your iPad, iPhone and iPod touch.
| New version | 2.1 |
| Old version | 2.0.8 |
| Release Notes | This update provides the following corrections and improvements: • App launch time improvement. • Fixes noise at beginning of new notes that happened under rare situations. • Fixes crash on certain MIDI messages (stand-alone app and Audio Unit). • Audiobus: Fixes connection problem with Audiobus on iOS 14 and higher (see NOTE below).¹ • Audiobus: If session is restored from Audiobus, don’t ask the same question dialog again whether IAA MIDI or IAA MIDI + CoreMIDI shall be used. • IAP downloads: Fixes active download from being interrupted under certain conditions if app was sent into background. • IAP downloads: Fixes active download being restarted under certain conditions after user requested to pause the download. • IAP downloads: Fixes download status being incorrectly shown as “Download Aborted” even though download was auto resumed already. • IAP downloads: Fixes “Download Aborted” and “Resume” button been shown even though the respective piano model was already resumed. • IAP downloads: Fixes green arrow animation on progress bar which was stopped if either app went into background or user switched to a different app screen. • IAP downloads: Distinguishes now between “Queued for Download” for non-installed piano models and “Queued for Update” for already installed models. • Audio Unit UI: Fixes sound selection list from being cropped if AU UI height inside AU host app was rather small. • MIDI recorder: Fixes crash on 2nd iOS “Open with …” request for user imported MIDI files. • MIDI recorder: Supports now MIDI files with “.midi” file extension (instead of being limited to only “.mid”). • Volume knob: Shows now that MIDI CC#7 is associated with this control. ¹ NOTE: This version asks you for permission to access the local network, which is required for Audiobus to work on iOS 14 and higher. If you are not using Audiobus you can safely ignore or decline this permission request. You can also grant and revoke this permission under iOS Settings -> “Privacy” -> “Local Network” at any time. |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Keyboards, Piano |
| Supports | Inter-App Audio (IAA), Audiobus |
JamUp is an easy to use drag-and-drop interface that features amps, stomp-boxes and rack effects, all in a single app.
| New version | 3.6.42 |
| Old version | 3.6.41 |
| Release Notes | Hi there, This update is for fixing some minor issues and stability maintenance. Rock on, The Positive Grid Team |
| Author | Positive Grid Inc |
| Type | Effect |
| Effect type | Reverb, Delay, Echo, Compressor, Limiter, Gate, Distortion, Drive etc., Modulation effects, Pitch effects, Guitar effects, All-in-one |
| Supports | Audiobus |
ToneBoosters Enhancer is an enhancer, exciter and sweetener plug-in.
| New version | 1.2.9 |
| Old version | 1.2.8 |
| Release Notes | Significant improvement in UI performance New audio settings panel in stand-alone app to choose sampling rate and frame size (latency) |
| Author | ToneBoosters |
| Type | Effect |
| Effect type | Other |
| Supports | Inter-App Audio (IAA), Audio Unit (AU) |
Dual VCF adds motion, shape, and colour. It produces evolving rhythmic movement and complex dynamic filter shapes.
| New version | 1.6.1 |
| Old version | 1.6.0 |
| Release Notes | New audio settings panel in stand-alone app to choose sampling rate and buffer size (latency) |
| Author | ToneBoosters |
| Type | Effect |
| Effect type | Equalizer, Filter |
| Supports | Inter-App Audio (IAA), Audio Unit (AU) |
BitJuggler is an audio plugin to simulate vintage digital processing and to recreate digital imperfections.
| New version | 1.1.5 |
| Old version | 1.1.4 |
| Release Notes | Significant UI performance improvements Audio settings panel in stand-alone app to choose sound card, sampling rate and frame size (latency) |
| Author | ToneBoosters |
| Type | Effect |
| Effect type | Other |
| Supports | Inter-App Audio (IAA), Audio Unit (AU) |
ToneBoosters Reverb is a studio-quality reverberation plug-in.
| New version | 1.5.6 |
| Old version | 1.5.5 |
| Release Notes | New audio settings panel in stand-alone app to select sampling rate and buffer size (latency) |
| Author | ToneBoosters |
| Type | Effect |
| Effect type | Reverb, Delay, Echo |
| Supports | Inter-App Audio (IAA), Audio Unit (AU) |
The BandHelper app works with your BandHelper account to share info with your bandmates, streamline your management duties and power your live show.
| New version | 4.2.1 |
| Old version | 4.2 |
| Release Notes | - Fixed a problem that caused the data in SMF data files to be sent in an infinite loop. - Updated the MIDI SoundFont file picker to show files with the correct file extensions, and to correctly add an imported file - Fixed a problem that prevented SMF music files from playing. - Fixed a problem that incorrectly reported invalid data in the Raw MIDI field. - Fixed a problem that prevented the set list view from loading with a layout that contained the Song Number field in the bottom toolbar. - Fixed a problem where the Schedule > Calendar page sometimes didn't load. - Fixed a problem that prevented the Ableton Link function from activating. - Fixed a problem that prevented the song number button in the set list view from activating. - Fixed a problem that caused the text sizes of multi-line custom fields to save incorrectly when editing from the Repertoire > Layouts list. - Fixed a problem that caused the Scroll Up/Down and Select remote control actions to simply scroll to the top of the song list. - Fixed some layout issues with the Titles Only, One Column Per Set option on the set list share page. - Fixed a crash when editing a stage plot layout on a phone. - Fixed a problem that prevented new data from syncing to an Apple Watch. |
| Author | Arlo Leach |
| Type | Tool |
| Supports | Inter-App Audio (IAA) |
ToneBoosters ReelBus is a magnetic tape simulation plug-in for iOS or iPadOS device.
| New version | 1.5.1 |
| Old version | 1.5.0 |
| Release Notes | Significant UI performance improvements New audio settings panel in stand-alone app to select audio sampling rate and frame size (latency) |
| Author | ToneBoosters |
| Supports | Inter-App Audio (IAA), Audio Unit (AU) |