djay transforms your iPhone or iPod touch into a full–featured DJ system.
| New version | 2.8.14 |
| Old version | 2.8.10 |
| Release Notes | • Added support for syncing of cue points via iCloud with other Macs and iOS devices running the latest version of djay or djay Pro* • Added improved beat-synchronized scrubbing through songs • Added ability to add/removed songs in Queue via MIDI controllers (e.g. Reloop Beatpad 2) • Improved saving of cue points to be immediately applied to other decks with the same song • Improved song loading to allow loading a new song when another is currently loading on the same deck • Fixed buttons at bottom screen edge in landscape mode sometimes not reacting immediately on iPhone X • Fixed Spotify login error when using certain mobile providers (e.g. T-Mobile USA) • Various fixes and improvements * Please note that syncing across devices requires the newest versions of djay and djay Pro (syncing with older versions including djay Pro 1 for Mac is not supported) Thank you for using djay 2. Please support us by rating the app with every update. We are looking forward to your feedback! |
| Author | algoriddim GmbH |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | DJ |
| Supports | Inter-App Audio (IAA), Audiobus |
The Moog Model 15 App is the Moog modular synthesizer and synthesis educational tool.
| New version | 2.1.2 |
| Old version | 2.1.1 |
| Release Notes | • Added support for MIDI CC #0 Bank Change to select a bank in the preset browser, unless this has been mapped to a control. • Various improvements to the preset browser. • Fix to preserve instrument's power state when making the app active again after going to background. • Fix for situations where the correct keyboard would not load at application startup. • Fix for sending out channel pressure messages from built-in keyboards. |
| Author | Moog Music Inc. |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
The Minimoog Model D App is a mobile transmutation of the world’s first portable synthesizer, the Minimoog Model D®.
| New version | 1.1.2 |
| Old version | 1.1.1 |
| Release Notes | • Added support for MIDI CC #0 Bank Change to select a bank in the preset browser, unless this has been mapped to a control. • Preserve instrument's power state when making the app active again after going to background. • The advanced modulation settings are now properly restored for each individual AUv3 instance. • The MIDI CC mappings are now properly restored for each individual AUv3 instance. • The pitchwheel in GarageBand now works as intended when using Model D as AUv3. • Fixed rare occurances of hanging notes over MIDI. |
| Author | Moog Music Inc. |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU), Ableton Link |
Loopy offers a sleek, expressive, instantly understandable interface that beginners can start using effectively straight away.
| New version | 1.6.9 |
| Old version | 1.6.8 |
| Release Notes | Minor fixes: - Improved behaviour when connected to Ableton Link and starting record from paused - Fixed some iPhone audio issues when using Audiobus |
| Author | A Tasty Pixel |
| Type | Host |
| Supports | Audiobus, Ableton Link |
iReal Pro offers an easy-to-use tool to help musicians of all levels master their art. It simulates a real-sounding band that can accompany you as you practice.
| New version | 8.2.2 |
| Old version | 8.2.1 |
| Release Notes | Bug fixes and improvements |
| Author | Technimo LLC |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | All-in-one |
| Supports | Audiobus |
Loopy offers a sleek, expressive, instantly understandable interface that beginners can start using effectively straight away.
| New version | 2.7.9 |
| Old version | 2.7.8 |
| Release Notes | Minor fixes: - Improved behaviour when connected to Ableton Link and starting record from paused - Fixed some iPhone audio issues when using Audiobus |
| Author | A Tasty Pixel |
| Type | Host |
| Supports | Audiobus, Ableton Link |
GeoShred is an expressive musical instrument with a multi-touch performance surface, coupled with an advanced physical model of a guitar.
| New version | 2.6.0094 |
| Old version | 2.6.0080 |
| Release Notes | - Fixed issue with backing tracks on iPad2 - Made keyboard width, pan, rows, frets controls available for the control surface - Keyboard has been generalized for arbitrary aspect ratios - Fixed issue with stuck arpeggiator - MIDI ports for Pro, Play and Control are now independent. |
| Author | Wizdom Music LLC |
| Type | Instrument, Controller |
| Instrument type | Synth |
| Instrument sounds | Guitar |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
World of Bagpipes Pro is a five sounding sets of bagpipes for the iPad that are played using standard Scottish piping fingerings.
| New version | 4.3 |
| Old version | 4.2 |
| Release Notes | Fixed wavering GHB drone. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Winds |
| Supports | Inter-App Audio (IAA), Audiobus |
Create and save complete multi-track music projects. Record, sequence, edit, mix and render complete songs.
| New version | 3.1.903 |
| Old version | 3.1.893 |
| Release Notes | - Clips can be moved and or copied between tracks - Automation tracks can be reassigned to defined destination & have quick-access parameter slider in the mixer. - Export dialog now has "save", and "send to another destination" controls, no need to pre-select destination. - FX Distortion has more distortion modes and stereo and bias controls. - FX Equalizer: Every band has a stereo control. - FX Filter: Updated UI - FX MultiFX: has new UI with quick access to an effect kind and XY area increased size. - Parameters slider in the mixer were visible when "hide tracks" enabled. - Samples: Can be reversed for audio tracks and drum samples. - Menus: Improved design. - Bugfixes and performance improvements. |
| Author | Image Line Software |
| Type | Host |
| Supports | Audiobus |
GeoShred Play is an expressive musical instrument with a multi-touch performance surface, coupled with an advanced physical model of a guitar.
| New version | 2.6.0094 |
| Old version | 2.6.0080 |
| Release Notes | - Fixed issue with backing tracks on iPad2 - Made keyboard width, pan, rows, frets controls available for the control surface - Keyboard has been generalized for arbitrary aspect ratios - Fixed issue with stuck arpeggiator - MIDI ports for Pro, Play and Control are now independent. |
| Author | Wizdom Music LLC |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Guitar |
| Supports | Inter-App Audio (IAA), Audiobus |
Play the Traditional Irish Bagpipes on your iPad.
| New version | 8.0.3 |
| Old version | 8.0.2 |
| Release Notes | Performance improvements. Major new feature! You may now play the app chanter sounds using a hardware MIDI chanter like the Fagerström Technopipes and other MIDI chanters. Connect your MIDI chanter first using a hardware MIDI interface, then launch the Uilleann app. Touch the MIDI icon on the lower left corner to set the MIDI channel and bottom-D transpose (relative to MIDI note 67 (G3)) for your MIDI chanter. Default transpose is 0 for the Fagerstrom on which the bottom note is MIDI note G = 67. For a different hardware chanter, adjust the transpose as required. MIDI channel and transpose settings are saved on exit. For the drones, sending any Note On message (Note number < 80) on MIDI Channel 15 from your hardware MIDI chanter will start the drones, and the matching Note Off message for the start note will stop the drones. Alternately, touch the drone graphic on the iPad to start/stop the drones. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Winds, Ethnic |
| Supports | Inter-App Audio (IAA), Audiobus |
Real Guitar is a realistic guitar simulator apps.
| New version | 3.9.2 |
| Old version | 3.9.1 |
| Release Notes | Performance and stability improvements |
| Author | Gismart Limited |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Guitar |
| Supports | Inter-App Audio (IAA), Audiobus |
Groove Rider GR-16 is a professional step-sequenced groove box, inspired by professional hardware drum machines and rhythm boxes.
| New version | 1.4.3 |
| Old version | 1.4.2 |
| Release Notes | In this update (1.4.3): - fixed crash issue, occurred when browsing through user imported samples during playback; - added channel numbers on the mixer page. |
| Author | Dmitrij Pavlov |
| Type | Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Drums, Percussion |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Make music in seconds. Share, remix and collaborate with music makers all over the world.
| New version | 2.8.0 |
| Old version | 2.7.3 |
| Release Notes | Taking a break from GDPR compliance work, we've made some sweet improvements to Figure: - Figure now supports iPhone X, and dare we say it looks, sounds and works beautifully on it! - We've also fixed some bugs and made some minor improvements under the hood Have fun making music with Figure! The Allihoopa Team |
| Author | Reason Studios AB |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards, Drums, Percussion |
| Supports | Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.2.0 |
| Old version | 6.1.9 |
| Release Notes | Fixed Fade Cycle effect duration for Hue Entertainment and added bridge version checking. Improved Hue connection if link button was pressed too early. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Make music with NodeBeat, the intuitive and fun visual music app for all ages.
| New version | 3.1.1 |
| Old version | 3.1.0 |
| Release Notes | Minor bug fixes. Enjoying NodeBeat? Please help by updating your rating and review. It really helps! |
| Author | AffinityBlue |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.2.0 |
| Old version | 6.1.9 |
| Release Notes | Fixed Fade Cycle effect duration for Hue Entertainment and added bridge version checking. Improved Hue connection if link button was pressed too early. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
StepPolyArp is a real-time Midi arpeggiator to control Midi instruments, sequencers like Logic, Cubase, Live, and all other Midi sequencers, or even other virtual instruments installed on the same iPad.
| New version | 3.1 |
| Old version | 3.0.4 |
| Release Notes | • The preset manager has been optimized to display long preset lists faster • Bugs fixed |
| Author | Laurent Colson |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Auria is a mobile music production system designed from the ground up for the iPad.
| New version | 2.18 |
| Old version | 2.17 |
| Release Notes | Various fixes and improvements. See our forum for more information. |
| Author | WaveMachine Labs, Inc. |
| Type | Host |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Wotja X is a new cross-platform interface for the 'Wotja Generative Music System'.
| New version | 5.6.0 |
| Old version | 5.5.2 |
| Release Notes | Major update for MIDI lovers! We've added support for two new MIDI Input options/features so that Wotja can now sync to e.g. a DAW: - NEW: MIDI Transport Control (AKA MIDI Machine Control – MMC) - NEW: MIDI Clock Sync - FIXED: Was incorrectly displaying/setting Gen Bars Range in Rules segment - FIXED: Was incorrectly displaying infinity symbol for both Repeats and Repeats Range in Rules segment - CHANGED: Renamed “MIDI Input” > “MIDI Input” to “MIDI Input” > “Devices” - CHANGED: Renamed “MIDI Output” > “MIDI Output” to “MIDI Output” > “Devices” - CHANGED: Cut-Up Export to Clipboard now includes “Made with #Wotja. https://wotja.com" - CHANGED: Links to video tutorials to https://www.youtube.com/intermorphic If you have any feedback, comments or discover any problems we'd love to hear from you! See: https://intermorphic.com/help |
| Author | Intermorphic Limited |
| Type | Host, Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Keyboards |
| Effect type | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |