Groove Rider GR-16 is a professional step-sequenced groove box, inspired by professional hardware drum machines and rhythm boxes.
| New version | 1.4.1 |
| Old version | 1.4.0 |
| Release Notes | In this version (1.4.1): - fixed crash when calling Render Pattern Audio functions, which was introduced after major changes in the system in the last update; - fixed issue: short notes sometimes were not playing back if large amounts of swing or groove quantize were applied to them. In previous version (1.4.0): - iPhone X display support added; - Midi Out & VIrtual Midi Out ports added (need to be enabled in Settings menu); - Pitch knob behavior changed: now it changes pitch by semitones; hold SHIFT for precise pitch adjustment; - added one-shot mode for user samples. Use "Sample Mode" parameter in Part settings menu to select One-Shot mode for specific part; - "Sample Loop" parameter is now renamed to "Sample Mode" and represents 3 states: Off, Loop and One-Shot; - new buttons on the sample view. These parameters are now accessible from the sample view screen as small buttons: Edit Controls Type (Dist / Smpl), Sample Mode (Loop / One-Shot), Sample Re-Pitch; - added new utility function: Empty Current Pattern. It clears all notes and automation data on all parts of current pattern, but leaves any sound settings intact. This is useful to quickly make blank-templates out of factory preset patterns from Bank A; - fixed: Midi Input port events jitter (inaccurate notes timing); - fixed: bug with "short C-1 note", which sometimes could appear at empty steps in your patterns; - fixed issue, when, if used with AUM, the skin settings were always resetting to default skin; - new behavior in EDIT+SEQ mode: tapping any note in the Step Editor will remember it; you can then use Shift+Pad to insert remembered note to another steps. It can be used, for example, to copy individual steps/notes inside one Part track; - new behavior in SEQ mode: tapping pads (steps) now acts like muting/unmuting them, not entirely deleting like it was before. So, you can tap the step again to get it back. However, when you save your pattern, all currently muted steps will not be saved. Also, you can tap Shift+Pad to clear the step and place a note with default values; - fixed "Render Pattern Stems" issue: parts with Haas effect assigned are now exported in stereo; - new factory patterns added (6 patterns demo called "Transparency"); - for those brave people, who still dares to use GR-16 on iPhone 4S: user interface is slightly optimized to better fit the screen. |
| Author | Dmitrij Pavlov |
| Type | Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Drums, Percussion |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Samplist is a MIDI Sampler Instrument which allows you to easily chop a sample into different slices.
| New version | 1.3.3 |
| Old version | 1.3.2 |
| Release Notes | What's new: • Added MIDI Mapping & Assignments. You can open Settings > MIDI Mappings and assign your controllers to Samplist's parameters. • Added MIDI Pitch-bend support. You can now bend your samples +/- 2 semitones and create some funky leads. Plus the good stuff from version 1.3.1 • Realtime Time Stretch – Transpose your samples and preserve tempo. Play your samples chromatically and maintain tempo (mono only). • Added option to select slices when pressing the pads. Useful when editing. Turn it off while performing ;) • Samples are sorted in alphabetical order for easier management. • Improved memory management. • Improved performance when loading longer samples. • Bug fixes and various improvements. And if you use and like Samplist, please leave an honest review. Good or bad. It helps anyway :) |
| Author | Cristina Buga |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Inter-App Audio (IAA), Audiobus |
EFX is a 4 channels multi-effect processor, offers complex options to shape the sound and to route the audio effects stream.
| New version | 1.1.1 |
| Old version | 1.1 |
| Release Notes | - Improvement: Level meters react better now - Improvement: Delays get cleared when you change an effect (no "ghost" artifacts) - Bugfix: Possible crash when delete or sharing a non existing/non selected preset |
| Author | Oliver Greschke (DE) |
| Type | Effect |
| Effect type | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Moebius Lab is a multimorphic sound processor which contains a synth, a varispeed stereo sample player, effects and LFOs that can modulate each parameter.
| New version | 2.0.4 |
| Old version | 2.0.1 |
| Release Notes | + New Slider/Knobs resizable range for the LFO/MIDI/Accel etc… + MIDI Channel for note on/off/pg, fixed + Some minor iPhone UI bugs, fixed |
| Author | Amazing Noises |
| Type | Instrument, Effect |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Effect type | Equalizer, Filter, Reverb, Delay, Echo, Compressor, Limiter, Gate, Distortion, Drive etc., Chorus, Flanger, Phaser etc., Modulation effects, Pitch effects |
| Supports | Inter-App Audio (IAA), Audiobus |
Blocs Wave is a music app for making and recording new music quickly. For songwriters and electronic music makers alike, it is an on-the-move portable music studio.
| New version | 13.3.1 |
| Old version | 13.3 |
| Release Notes | This version contains a few minor bugfixes. We really appreciate your feedback. If you have comments, questions or feature requests, let us know at support@ampifymusic.com or ampifymusic.com/survey. If you like Blocs Wave and have a minute to spare, please review it in the app store. You can also review the app on iPhone from within the in-app menu. |
| Author | Focusrite Audio Engineering |
| Type | Host |
| Supports | Audiobus, Ableton Link |
DRC is a virtual analog polyphonic synthesizer that recreates the characteristic sound of an analog synthesizer.
| New version | 1.1.9 |
| Old version | 1.1.8 |
| Release Notes | - Added new 'Iconic Sounds Vol. 1' bank |
| Author | Imaginando Lda |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Groove Rider GR-16 is a professional step-sequenced groove box, inspired by professional hardware drum machines and rhythm boxes.
| New version | 1.4.0 |
| Old version | 1.3.3 |
| Release Notes | In this version (1.4.0): - iPhone X display support added; - Midi Out & VIrtual Midi Out ports added (need to be enabled in Settings menu); - Pitch knob behavior changed: now it changes pitch by semitones; hold SHIFT for precise pitch adjustment; - added one-shot mode for user samples. Use "Sample Mode" parameter in Part settings menu to select One-Shot mode for specific part; - "Sample Loop" parameter is now renamed to "Sample Mode" and represents 3 states: Off, Loop and One-Shot; - new buttons on the sample view. These parameters are now accessible from the sample view screen as small buttons: Edit Controls Type (Dist / Smpl), Sample Mode (Loop / One-Shot), Sample Re-Pitch; - added new utility function: Empty Current Pattern. It clears all notes and automation data on all parts of current pattern, but leaves any sound settings intact. This is useful to quickly make blank-templates out of factory preset patterns from Bank A; - fixed: Midi Input port events jitter (inaccurate notes timing); - fixed: bug with "short C-1 note", which sometimes could appear at empty steps in your patterns; - fixed issue, when, if used with AUM, the skin settings were always resetting to default skin; - new behavior in EDIT+SEQ mode: tapping any note in the Step Editor will remember it; you can then use Shift+Pad to insert remembered note to another steps. It can be used, for example, to copy individual steps/notes inside one Part track; - new behavior in SEQ mode: tapping pads (steps) now acts like muting/unmuting them, not entirely deleting like it was before. So, you can tap the step again to get it back. However, when you save your pattern, all currently muted steps will not be saved. Also, you can tap Shift+Pad to clear the step and place a note with default values; - fixed "Render Pattern Stems" issue: parts with Haas effect assigned are now exported in stereo; - new factory patterns added (6 patterns demo called "Transparency"); - for those brave people, who still dares to use GR-16 on iPhone 4S: user interface is slightly optimized to better fit the screen. |
| Author | Dmitrij Pavlov |
| Type | Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Drums, Percussion |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Dedalus Delay is a real time audio mangler. A network of delay lines is continually granulated and modulated, producing a labyrinth of echoes, which are further processed by filters, dynamic processors and saturation modules.
| New version | 2.0.4 |
| Old version | 2 |
| Release Notes | + New Slider/Knobs resizable range for the LFO/MIDI/Accel etc… + MIDI Channel for note on/off/pg, fixed + Some minor iPhone UI bugs, fixed |
| Author | Amazing Noises |
| Type | Effect |
| Effect type | Reverb, Delay, Echo |
| Supports | Inter-App Audio (IAA), Audiobus |
The Amazing Noises Reverb is a Feedback Delay Network (FDN) Reverb Effect, which can create nice reverberated ambiences, from small rooms to huge buildings.
| New version | 2.2.4 |
| Old version | 2.2 |
| Release Notes | + New Slider/Knobs resizable range for the LFO/MIDI/Accel etc… + MIDI Channel for note on/off/pg, fixed + Some minor iPhone UI bugs, fixed |
| Author | Amazing Noises |
| Type | Effect |
| Effect type | Reverb, Delay, Echo |
| Supports | Inter-App Audio (IAA), Audiobus |
We have designed the UI with only the the physics of audio and the current touch interface in mind, dropping all the baggage of the past.
| New version | 1.0.4 |
| Old version | 1.0.3 |
| Release Notes | Added a work around a Apple framework bug that got introduced after our last update. We tweaked the gestures a little to make it a little easier to change gain and frequency. |
| Author | Joshua Goossen |
| Type | Effect |
| Effect type | Equalizer, Filter |
| Supports | Audio Unit (AU) |
A brickwall peak limiting app, for the complete control of your audio volume.
| New version | 2.8.2 |
| Old version | 2.8 |
| Release Notes | + New Slider/Knobs resizable range for the LFO/MIDI/Accel etc… + MIDI Channel for note on/off/pg, fixed + Some minor iPhone UI bugs, fixed |
| Author | Amazing Noises |
| Type | Effect |
| Effect type | Compressor, Limiter, Gate |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Wotja X is a new cross-platform interface for the 'Wotja Generative Music System'.
| New version | 5.2.12 |
| Old version | 5.2.11 |
| Release Notes | Bug fixes |
| Author | Intermorphic Limited |
| Type | Host, Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Keyboards |
| Effect type | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
X Drummer is the drum production tool for guitarists, songwriters and mobile musicians.
| New version | 1.5.7 |
| Old version | 1.5.6 |
| Release Notes | The 1.5.7 update includes the following: - New: Audio Import function. You can now import audio tracks into X Drummer using My Files (iOS 11), iCloud, Dropbox, or Audio Paste! - Song Editor UX optimization - General bug fixes and performance improvements |
| Author | Positive Grid Inc |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Inter-App Audio (IAA), Audiobus |
Create and save complete multi-track music projects. Record, sequence, edit, mix and render complete songs.
| New version | 3.1.893 |
| Old version | 3.1.89 |
| Release Notes | * Improved Automation Editor (Automation Clips are now added when an Automation Track is added, changes to drawing of Automation) * Audio Clip content - Risers (free) * DirectWave content - Tuned 808 Bass EXP * Bug fixes and performance improvements |
| Author | Image Line Software |
| Type | Host |
| Supports | Audiobus |
Rozeta is a suite of MIDI sequencers and controllers.
| New version | 1.1 |
| Old version | 1.0.9 |
| Release Notes | - Important new AU MIDI timestamp protocol implemented 'under the hood' - When using count-in (or negative beat-times), first notes would sometimes be skipped in X0X, Rhythm, Bassline or Cells - Fixed MIDI Trig behavior in Cells |
| Author | Bram Bos |
| Type | Controller |
| Supports | Audio Unit (AU) |
Play your favorite songs in their original sound using your iPhone or iPad. It's a whole new experience in learning songs.
| New version | 2.1.2 |
| Old version | 2.1.1 |
| Release Notes | Good news everyone—now Tonebridge supports IRIG BLUEBOARD! Finally you can use your Blueboard to control effect, switch between pedals in pedalboards etc. Sorry for this not being fixed for so long, but better late than never! Follow @tonebridgeapp on Twitter to read the latest news and secret tricks in Tonebridge. Have a suggestion or comment? Shoot us an email at tonebridge@ultimate-guitar.com Rock'n'roll everyone! |
| Author | Ultimate Guitar |
| Type | Effect |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Effect type | Guitar effects |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
Waveshaping Synthesis is a type of distortion synthesis that can create dynamic spectra in a controlled way.
| New version | 1.4.0 |
| Old version | 1.3.1 |
| Release Notes | - AUv3 AudioUnit with parameter automation (requires iOS10) - Audiobus 3 support |
| Author | Harry Gohs |
| Type | Instrument |
| Instrument type | Sampler, Synth |
| Instrument sounds | Keyboards |
| Supports | Audiobus, Ableton Link |
LumaFusion is a powerful multi-track video editor for mobile devices.
| New version | 1.5.4 |
| Old version | 1.5.3 |
| Release Notes | NEW • When switching between categories of effects, the position in the album is saved/restored for each category. FIXED • Large videos failed to export when adding 360 metadata • User-saved motion presets did not restore crop information • Effects libraries incorrectly ordered • Improved stability In upcoming releases we’ll continue adding new features, and will continue to enhance every aspect of LumaFusion. We look forward to your feedback. Join our forums at forums.luma-touch.com (registration code 4fusion90) or contact us directly at support@luma-touch.com |
| Author | Luma Touch LLC |
| Type | Host |
| Supports | Audio Unit (AU) |
Like everyone, you have a number of amp and effect Apps. Amp Rack lets you line them up in one large display and switch between them with a single tap.
| New version | 2.0 |
| Old version | 1.0 |
| Release Notes | Added support for Bluetooth LE peripherals (e.g. iRig Blueboard) so you can control Amp Rack from a foot switch or other device. Now supports drag-and-drop to re-arrange the effects/amps in the display. Added detailed information on fixing inter-app audio issues that can arise between Amp Rack and other effect apps (e.g. Amplitude). |
| Author | ENCLAYVE GROUP LLC |
| Type | Effect, Tool |
| Effect type | Guitar effects, Other |
| Supports | Inter-App Audio (IAA), Audiobus |
Metronome, Drum Machine, Practice Log.
| New version | 2.3.6 |
| Old version | 2.3.5 |
| Release Notes | I'm excited to release this update. It includes massive improvements to the Practice Log, including the ability to set Goals! It also includes under-the-hood speed and battery improvements. I'm always striving to make PolyNome the best music tool on the App Store. If you like PolyNome, please take a minute to leave a review. It's a huge help! If you have questions, problems, or just want to reach out, you can contact me through the Help page in the app, or via polynome.net Thank you, Joe [NEW] PRACTICE LOG ---------------- You can jump to the Practice Log for a specific Preset or Playlist by tapping the new Practice Log button on the right of each item. If you have a goal set, the button will be orange. (You can tap the "Labels" button and filter on the bar chart label to see only Presets that have goals set.) You can now add and edit Practice Events within the Practice Log: - swipe to the furthest right screen and tap the + button to add an event for the current Preset. - to edit an event, tap and hold it, or tap the Edit button and select the event you want to edit. GOALS ------- You can now set Goals for Presets, Playlists, and even Labels. You set goals on the Practice Log page. Tap where it says "vs Previous Period ▼" and choose "Set a Goal" - specify how long you want to practice each day/week/month for an open goal. - enter a target time (eg. 100 hours) and a deadline date, and you'll see how much practice you need to do today in order to hit your target. - enter a target tempo and deadline date and you'll see the bpm increase you need to hit each day. DAILY JOURNAL ---------------- Use the Daily Journal to make general notes about your practice session, or to plan what you want to work on in the future. Access it from the menu, or from the Practice Event Editor (tap the left of the 3 buttons under Play to toggle the Practice Event Editor). A calendar view shows you which days you have journal entries for. Tap an empty date to add an entry for that date. LABELS -------- A new star label has been added for convenience. To add a label to a Preset: - Select the Preset, then tap and hold the "Labels" button. Select the labels you want to add. or - Enter multi-select mode with the button in the top right. Select the Presets you want to add labels to. Tap the Change Labels button. To filter on a label: - Tap the "Labels" button and choose the label you want to filter on. When you're filtering on a Label you can arrange Presets or Playlists to allow you to work on them in order. - Tap the multi-select button (top right) - Select the Presets/Playlists in the order you want to work on them. - Tap the Actions button and choose Arrange Once you've worked on a Preset/Playlist, it will be moved to the bottom of the list. MISCELLANEOUS ------------------ - Meditation Bell added as an alternative timer sound (good for practicing meditation). You can choose the sound when setting a timer that has the alarm switch ON. You'll see a "bell" button appear - tap it to select your preferred sound. - Pause button appears when playing. - Ability to export Practice Events since a specified date. This speeds things up when copying between devices if you have a lot of practice events. [FIXED] - bugs with timer - issue where inc/dec set to "standard" was not remembered - other known bugs Please get in touch via the Help page if you find any bugs. I'll squash them as soon as I can! |
| Author | PolyNome Ltd |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audiobus |