Create and save complete multi-track music projects. Record, sequence, edit, mix and render complete songs.
| New version | 3.1.934 |
| Old version | 3.1.933 |
| Release Notes | Bug fixes 3.1.934 - Fixes iOS store crash - Users .midi & .tmpl (drum templates) files can be loaded now - .instr files are visible in the DirectWave list. Previously 3.1.933 - DirectWave has new features (Loop, Reverse, Legato, Mono and ADSR) - New file management system. Create folders (fold), cut, paste etc. Options available after selecting files (Select). - Re-layout of selection/files operation controls (moved to top of browser). - Fixed the crash when a parameter being automated by external CC - Misc bug fixes and stability improvements |
| Author | Image Line Software |
| Type | Host |
| Supports | Audiobus |
Celtic Sounds is a fully transposable MIDI sound module with five traditional Irish musical instruments.
| New version | 2.4 |
| Old version | 2.3 |
| Release Notes | Improved response speed and sound quality improvements. Added a "MIDI Transpose Semitones" control for use with MIDI hardware chanters and other controllers to shift the incoming MIDI stream to the required MIDI Note-On message range required by the app. The app may now be used as an Audiobus 2 source module and is compatible with Audiobus 3. Several audio quality related bug fixes related to pops/clicks on some devices when first playing. Celtic Sounds is now a Universal iPhone/iPad app! Improved visual interface on iPad and iPhone X, made the instrument and reverb selectors a bit taller. Improved audio engine sound and performance. Better handling of realtime volume control messages. Use the "Transpose Semitones" slider to shift the entire instrument up or down up to one octave in semitone increments. This setting shifts the pitch of the sounds but does not change the MIDI note numbers the app responds to. Touch the number to the right of the "Transpose Semitones" slider to reset the transposition to zero semitones. Now you can pick your reverb style from four options: Room, Hall1, Hall2, or Church. Added volume and reverb level indicators. If you have a MIDI "stuck note" touch the AppCordions logo to stop all sounds. Added support for Uilleann Pipes Drones and Baritone Regulator pairs. When playing the Uilleann instrument, the following special MIDI notes, starting starting on D2 (50) one octave below the lowest note on the chanter D3 (62), are used for the drone and regulator pair sounds: D2 (50) - Lynch Drones D#2(51) - Crowley Drones E2 (52) - D/F# Baritone/Tenor Regulator Pair F2 (53) - D/G Baritone/Tenor Regulator Pair F#2 (54) - F#/A Baritone/Tenor Regulator Pair G2 (55) - G/B Baritone/Tenor Regulator Pair G#2 (56) - G/C Baritone/Tenor Regulator Pair A2 (57) - A/C Baritone/Tenor Regulator Pair Uilleann pipes drones key triggers (D2 and D#2) are now "latching". The drones start on the first press of the trigger key, stop on the second. The chanter notes start at D3 (62) and go to D5 (86) When playing the Uilleann instrument, any pitch bend messages received only effect the chanter notes, not the drones or regulators. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Ethnic |
| Supports | Inter-App Audio (IAA), Audiobus |
Metronome, Drum Machine, Practice Log.
| New version | 2.3.8 |
| Old version | 2.3.7 |
| Release Notes | Thank you for using PolyNome. I'm constantly working to improve the app and add new features. If you have time to leave a review, they really help. Thanks in advance! New features in this version: ● NEW SOUNDS: Drumline sounds added! Plus some new snares, brush hits, a kick, and "In" and "Out" voice sounds. ● Improved Sound Picker: Tap "Met 1" or "Met 2" label in the mixer to bring up the Sound Picker. You'll see category buttons to quickly jump to the section you want. New sounds have a "New" label on them until you've heard them once. ● Improved Labelling: It's now super quick and easy to assign multiple labels to one or more Presets or Playlists. Simply tap the + Labels button to assign labels. Begin typing the name of the label you want to find. If it doesn't exist you can tap the top row to create and assign it. Tap the Filter button to filter on Labels. You can now filter on multiple labels at once (e.g. Band, A minor, Ballad) ● Improved Charts: You can now zoom in on charts and swipe left and right to get a closer look at your stats. The interface has been cleaned up and you can easily view them in portrait mode. ● Playlist Merge improvements: You can select multiple items in the Playlist Manager and “Merge To New” from the Actions menu. This will create a new Playlist containing the contents of your selected Playlists in the order that you selected them. This allows you to easily create clicks for different songs and then merge them into a Setlist. The new addition is that a title row will be added above the contents of each Playlist to help you navigate. See the What’s New video in the Inbox for more details. ● Minor changes: - When importing Presets or Playlists they'll be labelled with "!Last Import" so you can quickly find them. - Imported items will no longer have the ‘inbox’ or ‘book’ icons appended to them, but they will be permanently labelled with those tags. - When viewing an open goal (e.g. 30 mins/day) with a target time (e.g. 100 hours) you'll see the estimated completion date above the stats. - Long Preset and Playlist names are now truncated in the middle. - Fixed bug where the Cumulative Timer in the Practice Event display would continue to count up even while PolyNome was stopped. If you find any problems, or have any questions, don't hesitate to get in touch via the help page or the website. I'd love to see what you're creating with PolyNome. On iOS 11 devices you can record the screen (google it). If you post recordings of your creations to Instagram or Facebook and tag PolyNome or @PolyNomeApp I'll share the best ones. Thanks again! Joe |
| Author | PolyNome Ltd |
| Supports | Audiobus |
Metronome, Drum Machine, Practice Log.
| New version | 2.3.8 |
| Old version | 2.3.7 |
| Release Notes | Thank you for using PolyNome. I'm constantly working to improve the app and add new features. If you have time to leave a review, they really help. Thanks in advance! New features in this version: ● NEW SOUNDS: Drumline sounds added! Plus some new snares, brush hits, a kick, and "In" and "Out" voice sounds. ● Improved Sound Picker: Tap "Met 1" or "Met 2" label in the mixer to bring up the Sound Picker. You'll see category buttons to quickly jump to the section you want. New sounds have a "New" label on them until you've heard them once. ● Improved Labelling: It's now super quick and easy to assign multiple labels to one or more Presets or Playlists. Simply tap the + Labels button to assign labels. Begin typing the name of the label you want to find. If it doesn't exist you can tap the top row to create and assign it. Tap the Filter button to filter on Labels. You can now filter on multiple labels at once (e.g. Band, A minor, Ballad) ● Improved Charts: You can now zoom in on charts and swipe left and right to get a closer look at your stats. The interface has been cleaned up and you can easily view them in portrait mode. ● Playlist Merge improvements: You can select multiple items in the Playlist Manager and “Merge To New” from the Actions menu. This will create a new Playlist containing the contents of your selected Playlists in the order that you selected them. This allows you to easily create clicks for different songs and then merge them into a Setlist. The new addition is that a title row will be added above the contents of each Playlist to help you navigate. See the What’s New video in the Inbox for more details. ● Minor changes: - When importing Presets or Playlists they'll be labelled with "!Last Import" so you can quickly find them. - Imported items will no longer have the ‘inbox’ or ‘book’ icons appended to them, but they will be permanently labelled with those tags. - When viewing an open goal (e.g. 30 mins/day) with a target time (e.g. 100 hours) you'll see the estimated completion date above the stats. - Long Preset and Playlist names are now truncated in the middle. - Fixed bug where the Cumulative Timer in the Practice Event display would continue to count up even while PolyNome was stopped. If you find any problems, or have any questions, don't hesitate to get in touch via the help page or the website. I'd love to see what you're creating with PolyNome. On iOS 11 devices you can record the screen (google it). If you post recordings of your creations to Instagram or Facebook and tag PolyNome or @PolyNomeApp I'll share the best ones. Thanks again! Joe |
| Author | PolyNome Ltd |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audiobus |
GridInstrument lets you play your iOS device like a musical instrument. Instead of a piano keyboard, notes are arranged on a grid.
| New version | 0.9.2 |
| Old version | 0.9.1 |
| Release Notes | Added support for changing overlap when using the chromatic layout (this was previously only available for Diatonic) |
| Author | Decidedly, LLC |
| Type | Controller |
| Supports | Audiobus |
This intuitive virtual instrument features a super responsive fingerboard that plays and sounds like the traditional instrument in the most common two-row tunings of B/C, C#/D, and D/G, as well as an extended B/C+ layout with four chromatic buttons on a partial third row.
| New version | 3.1.1 |
| Old version | 3.0.2 |
| Release Notes | New features: Audio engine improvements for faster playing. Simplified the reverb controls, now just pick your reverb style and level. MIDI Control: The instrument may now be played via MIDI from a MIDI keyboard or other MIDI file player or controller apps. First launch the Hohner Melodeon Pro app, then choose "HohnerMelodeon" as the destination sound module in the CoreMIDI settings of other apps. Set the MIDI channel for the treble side using the "MIDI Channel" slider on the settings page. Lowest note is G3 (MIDI Note 55) Range is G3 through E6. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus |
Play the Traditional Irish Bagpipes on your iPad.
| New version | 8.6 |
| Old version | 8.5.1 |
| Release Notes | Faster response time and sound quality improvements. The "Note Bending" control also now controls the enabling or disabling of reacting to MIDI Pitch Bend messages. The app responds to MIDI Pitch Bend messages (two-semitone range) on the Chanter channel. The Note Bend control enables/disables the feature. Regulator pairs respond on the next MIDI channel after the chanter starting on MIDI note 60. More robust support for using the app as a sound module via CoreMIDI with other MIDI file player apps. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Winds, Ethnic |
| Supports | Inter-App Audio (IAA), Audiobus |
Jamzone transforms your Apple device into a live rehearsal studio. Choose your favorite song to jam along to from hundreds of the most popular.
| New version | 2.1.0 |
| Old version | 2.0.1 |
| Release Notes | Sand in your shoes? Sunscreen slathered on your face? As it should be! While you are soaking in the sun, our team got out the fans, loaded their drinks with ice and got to work making Jamzone even better! === IMPROVEMENTS === - New player interface - New option to improve audio latency (perfect and practical for use with Bluetooth) - Pulsating Play/Pause - Improved management of portrait / landscape mode - Swipe back to go to the previous screen - Looping got better |
| Author | Recisio |
| Type | Host, Tool |
| Supports | Inter-App Audio (IAA) |
mood is a personal interpretation of the legendary Analog Synthesizer by Eugenio Giordani
| New version | 1.2.2 |
| Old version | 1.2 |
| Release Notes | Wave and Ratio Knobs, Bug Fixed |
| Author | apeSoft |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU), Ableton Link |
Tin Whistle Pro is an authentic sounding traditional Irish tin whistle for the iPad that is fully tuneable and plays in multiple keys (High-D, C, Bb, G, F, and Low-D).
| New version | 2.1 |
| Old version | 2.0 |
| Release Notes | Faster response time, sound quality improvements, and bug fixes. Simplified reverb control. Now just pick your reverb style and level. MIDI improvements and new features: Implemented a better polyphonic to monophonic conversion algorithm based on most recent played notes. This makes the app work much better with keyboards and MIDI file players. Thank you Jesse Chappell (ThumbJam developer) for the suggestion. MIDI Chanter control for the Fagerström Uilleann Technopipes and other MIDI chanters and keyboard controllers: Connect your MIDI chanter first to your iPhone using a hardware MIDI interface, then launch Tin Whistle MIDI range is chromatic over the complete two-octave range of the instrument. Use the "Channel" control to set your controller's output MIDI channel. Use the "Use Lowest Note Setting" switch setting to enable / disable the bottom note offset for use with MIDI keyboards and chanters. When OFF, (best for use with MIDI keyboards) uses the following notes as the lowest note based on the selected key of the whistle: High-D: 74 High-C: 72 Bb: 70 G: 67 F: 65 Low-D: 62 When ON, set the lowest MIDI note (default is for the Fagerström Uilleann Technopipes 69 - A3) to match your MIDI chanter. Range is from MIDI note 55 to 79. Pitch bend response is based on the setting of the "MIDI Pitchbend Semitones" slider. Range is from 0 to 12 semitones. Default is 2 semitones. Also works as a sound module for MIDI file player apps. |
| Author | Michael Eskin |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Winds, Ethnic |
| Supports | Inter-App Audio (IAA), Audiobus |
Sonic Logic is a modular MIDI controller that allows you to edit and control MIDI setups from your iPad.
| New version | 3.0.3 |
| Old version | 3.0.2 |
| Release Notes | Version 3.0.3 fixes an issue where some arrangements would open incorrectly. |
| Author | Uri Nachmias |
| Type | Controller |
| Supports | Audiobus |
Want to sing as a popstar on AutoPitch, live-pause your voice, talk with a deep robot voice all at once? Voice Synth does all this and more, all based on your own unique voice.
| New version | 5.0.3 |
| Old version | 5.0.2 |
| Release Notes | • Allow explicit selection of bluetooth audio device types (microphones, HiFi speakers) • Fixes crash when (dis)connecting Bluetooth midi devices • Both audio input and output can now be rerouted • Re-enabled compatibility with iOS10 New in V5.0 • Audio Units V3 for use in DAWs as instrument (sampler mode) and effect (live mode) • New macOS version, preset compatible with iOS! • iPhone X support • Choose audio route • Compatibility with output-only bluetooth speakers • Connect directly with bluetooth midi devices (without need for a 3rd party app) • Minor changes input/output gain trimming, mic thru on/off • More than 50 new presets, total 250+ Modular (free) version • Permanent and more functional free try-out • Sampler and Designer are now included in "Instrument" module, also for existing customers! |
| Author | Qneo |
| Type | Effect |
| Effect type | Vocoder, Other |
| Supports | Inter-App Audio (IAA) |
Want to sing as a popstar on AutoPitch, live-pause your voice, talk with a deep robot voice all at once? Voice Synth does all this and more, all based on your own unique voice.
| New version | 5.0.3 |
| Old version | 5.0.2 |
| Release Notes | • Allow explicit selection of bluetooth audio device types (microphones, HiFi speakers) • Fixes crash when (dis)connecting Bluetooth midi devices • Both audio input and output can now be rerouted • Re-enabled compatibility with iOS10 New in V5.0 • Audio Units V3 for use in DAWs as instrument (sampler mode) and effect (live mode) • New macOS version, preset compatible with iOS! • iPhone X support • Choose audio route • Compatibility with output-only bluetooth speakers • Connect directly with bluetooth midi devices (without need for a 3rd party app) • Minor changes input/output gain trimming, mic thru on/off • More than 50 new presets, total 250+ Modular (free) version • Permanent and more functional free try-out • Sampler and Designer are now included in "Instrument" module, also for existing customers! |
| Author | Qneo |
| Type | Effect |
| Effect type | Vocoder, Other |
| Supports | Inter-App Audio (IAA) |
LayR is a polyphonic, multi-timbral synthesizer for iPad and iPhone, delivering up to 256 voices of rich, multi-layered and textured sounds.
| New version | 1.3 |
| Old version | 1.2.4 |
| Release Notes | Changes: - Macro Control Panel: A new panel that lets you change assigned synth parameters globally across an entire performance. - Link Assign Panel now has an extra section for assigning Layer parameters to Macro controls. - You can now assign any MIDI controller to Instrument Volume Sliders. ( defaults to cc 7 ). - Load Preset panel now updates it’s selection if a MIDI bank or program change is received while it’s visible. - New option in settings: Don’t Start Voices When Volume is Zero: Prevents voices being started if Instrument or Layer volumes are zero. - New option in settings: “Multi Out: FX Only in Stereo Output”, converts the IAA Stereo Mix output to an effects return if any of the 8 aux audio outputs are in use. - Dials will now always show at least 1 degree of coloured arc unless their value is equal to zero. - Increased fall time for peak hold metering in master strip. - Updated PDF manual. Bug Fixes: - Fixed a common crash during audio unit initialisation. - Fixed crash when long pressing on A to B range buttons. - Fixed: Potential crash when saving performances if poly aftertouch is assigned. - Fixed: Audio Unit now respects all persistent preferences set in the IAA app. - Fixed an audio spike when an AU is loaded in a certain state from a host. Could cause a loud reverb explosion. - Fixes a rare problem where an AU host could start to load a preset before the Audio Unit had completed initialisation. - Fixed: Current bank is now properly set when selecting a bank in the load preset panel. - Fixed a state where MIDI controller values for the CC Mixer would fail to be loaded from a saved preset. - Fixed: UI crash when tapping on AB-Range modifier tempo button after previously setting time to maximum ( 100s ). |
| Author | Living Memory Software |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU) |
djay transforms your iPad into a full–featured DJ system. Seamlessly integrated with both your iTunes music library and Spotify, djay gives you direct access to all your favorite songs and playlists.
| New version | 2.8.21 |
| Old version | 2.8.20 |
| Release Notes | • Improved playback of tracks from Spotify • Fixed tracks sometimes not being playable after being added to queue • Fixed possible issues when simultaniously adding multiple tracks to queue • Fixed possible crash when dropping items from iTunes or My Files source onto queue • Various fixes and improvements Thank you for using djay. Please support us by rating the app with every update. We are looking forward to your feedback! |
| Author | algoriddim GmbH |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | DJ |
| Supports | Inter-App Audio (IAA), Audiobus |
It's an all-in-one app, with a state-of-the-art tuner, an advanced metronome, dedicated orchestral strings and guitar tuning page, a piano keyboard, sound analysis pages, and audio/visual recording capabilities.
| New version | 1.6 |
| Old version | 1.5.4 |
| Release Notes | - Added new Note Staff view on analysis page for viewing your tuning in a standard music notation format - Improved immediate history scroll back on Analysis waveform plot, can now see previous 60 seconds of audio when freezing and play it back (with loop points). Can pinch to zoom, or set the playhead by tapping/dragging near top of plot. This also works when playing back previously recorded audio files. - Added support for remote control via AirTurn pedals and bluetooth (qwerty) keyboards, as well as MIDI controllers sending CC or PC events. See the new options in the Prefs. - Added German, French, Spanish, Chinese translations (along with updated Japanese) - Added 8/8, 11/8, and 4/8 meters - Added Viola da Gamba tunings - Added Mountatin Dulcimer tunings - Now record in stereo if there is a stereo input attached. - Added options in Prefs to show Smiley and Thinking faces METRONOME RELATED - New accelerando/ritardando support in metronome presets. See the revised tempo section in the preset editor. New modes for tempo include No Change, Fixed, Gradual (which lets you set start and end tempo), and Relative (which adjusts it +/- a specific BPM from previous). - Added additional preset sequencing option "Single". The toggle button for sequencing the met is now 3-way. Off, Sequence All, and Sequence Single. The new mode stays on the current preset but executes the bar count and any tempo changes, then if looping is off it will stop, or if looping is on it will repeat, including any tempo changes. - Now has ability to set a preset start and end for sequencing over (instead of just the whole list), long press on a preset button (when in sequence mode) for options. - Added preset number and measure number to metronome preset lists, to ease creating sequences or set lists - Tapping on metronome "list" button on main met page now brings up the preset groups list on iPhone. Long-pressing it brings up the current group (what it used to do when pressed normally). - Double-tap on presets on main page brings up popup editor all the time, long-press when in auto-advance mode brings up menu to set that preset as the range start or end, or clear the range (or edit). - Added combine preset groups feature when in Select mode, to create new groups from multiple existing ones. - Layout changes in main metronome page (and pulldown) to make it much easier to use one-handed on iPhone. - New popup slider/wheel controls for metronome tempo by holding down +/- tempo buttons. Defaults to slider, try the wheel by switching an option in the metronome prefs. - Fixed issue where metronome was silent using some bluetooth speakers. - Fixed visual metronome with /1 meters - Fixed import of presets via Airdrop, etc to work even when tuner isn't running - Importing metronome presets with identical name as an existing now gets unique name - Fixed issue where preset groups couldn't be exported because of their name - Prevented full swiping to delete preset groups (to avoid accidental deletion) - Fixed meter menu getting stuck open in preset editor - Fixed count-in related issues - Other bug fixes |
| Author | TonalEnergy, Inc |
| Type | Tool |
| Supports | Inter-App Audio (IAA), Audiobus |
Launchpad is an app for making and remixing electronic music.
| New version | 7.6.4 |
| Old version | 7.6.3 |
| Release Notes | This version contains a few minor bugfixes. We really appreciate your feedback. If you have comments, questions or feature requests, let us know at support@ampifymusic.com. If you like Launchpad and have a minute to spare, please review it in the app store. |
| Author | Focusrite Audio Engineering |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audiobus, Ableton Link |
AudioKit Synth One is a completely free & open-source professional iOS Synthesizer.
| New version | 0.8.9 |
| Old version | 0.8.8 |
| Release Notes | + Ableton Link integration Improved. App will stay the same tempo while changing presets when connected via Link. Using Ableton Link is a great way to keep the tempo of Synth One in sync with other apps + Misc small fixes + You are all awesome! We are all volunteering our time to build this app for you. No one gets paid anything. Please spread the word. The more musicians that know about this app, the more musicians we can all reach! Please send bug reports: hello@audiokitpro.com Thank you :) |
| Author | AudioKit Pro |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU), Ableton Link |
djay Pro is the Algoriddim’s DJ software with new features, a redesigned user interface, and advanced library management tools.
| New version | 2.0.7 |
| Old version | 2.0.6 |
| Release Notes | • Improved playback of tracks from Spotify • Added support for Audio Unit plugins of type "music effect" (e.g. FF Pro-Q 2) • Fixed tracks sometimes not being playable after being added to queue • Fixed tracks sometimes not being deletable from My Library when filter is applied • Fixed tracks sometimes being incorrectly associated with Spotify when adding local track to My Library • Fixed possible issues with recording due to audio interfaces using 96 kHz sample rate • Various fixes and improvements Thank you for using djay Pro. Please support us by rating the app with every update. We are looking forward to your feedback! |
| Author | algoriddim GmbH |
| Type | Host |
| Supports | Audio Unit (AU) |