Xequence is an advanced linear MIDI Sequencer and Keyboard / Controller for iPhone and iPad.
| New version | 1.7.2 |
| Old version | 1.7.1 |
| Release Notes | FIXES: - Instruments: Fix warning when tapping the keyboard toggle in controller setup. |
| Author | Seven Systems Cross-Platform Media Limited |
| Type | Controller |
| Supports | Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.4 |
| Old version | 6.0.2 |
| Release Notes | v6.0.4 Release: -Minor bug fixes. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
The ultimate orchestra sound app for sophisticated musicians by sound designer Kurt Ader, designed as professional sound module for your iPad, iPhone or iPod touch.
| New version | 2.1 |
| Old version | 2.0 |
| Release Notes | This update of iSymphonic Orchestra provides several software improvements. For more details about what's new in iSymphonic 2.1, please refer to the iSymphonic 2.1 release notes: https://doc.crudebyte.com/iSymphonic/Release-Notes/2_1/ |
| Author | Christian Schoenebeck d/b/a Crudebyte |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Strings, Winds |
| Supports | Inter-App Audio (IAA), Audiobus |
Elastic Drums is a music app showcasing an interactive drum kit, that enables to create a huge range of rhythmic grids, ranging from classical analog drumkits up to experimental soundscapes.
| New price | $6.99 |
| Old price | $8.99 |
| Author | Oliver Greschke (DE) |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.3 |
| Old version | 6.0.2 |
| Release Notes | v6.0.3 Fixes: -Improved app loading time for Hue users. -Fixed loading issues for Hue users on slower connections. -Fixed issues with Local Groups including Hue Entertainment areas. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Meteor is a digital multi-track recorder DAW designed specifically for the iPad.
| New price | $9.99 |
| Old price | $19.99 |
| Author | 4Pockets.com |
| Supports | Inter-App Audio (IAA), Audiobus |
An effect instrument anyone can play - sonic anarchy in the palm of your hand.
| New price | $1.99 |
| Old price | $3.99 |
| Author | MoMinstruments GbR |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Inter-App Audio (IAA), Audiobus |
LumaFusion is a powerful multi-track video editor for mobile devices.
| New version | 1.5.5 |
| Old version | 1.5.4 |
| Release Notes | FIXED • User-saved motion presets did not restore crop information • Improved stability In upcoming releases we’ll continue adding new features, and will continue to enhance every aspect of LumaFusion. We look forward to your feedback. Join our forums at forums.luma-touch.com (registration code 4fusion90) or contact us directly at support@luma-touch.com |
| Author | Luma Touch LLC |
| Type | Host |
| Supports | Audio Unit (AU) |
WorshipSong Band is a free cross-platform multitrack player system offering support for up to 16 audio tracks, built-in pads and ambient loops, metronome, and cues, integrated chord charts, lyrics with video backgrounds, foot pedal control, looping, key changes, networking between devices and laptops, and more.
| New version | 4.1.0 |
| Old version | 4.0.7 |
| Release Notes | -New pad bank controls -New click tracks with adjustable tempos -New count-in cues -Multiple song mixes can be saved per song, and selected with a single touch or in the saved arrangement -Playback on multiple devices can be synchronized on a wireless network through Ableton Link - A new personal band mix mode allows each network client to have their own audio mix - Song files can be copied directly to network clients from within the app - A new set-list import/export feature allows entire sets to be shared with the team -Larger chord chart view and play/pause button -Built in help now supports web links, and a new 'tips' window keeps you aware of app modes -App library is now visible in the Files app on IOS 11 - Added ability for Atmospheres to have up to 15 tracks - Added ability for Atmospheres to save mixes in set lists - Fixed pad automatic transitions |
| Author | Mark Snyder |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Ableton Link |
fluXpad is the sample sequencer that fully functions by simply drawing the sounds.
| New price | $5.99 |
| Old price | $7.99 |
| Author | MoMinstruments GbR |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.2 |
| Old version | 6.0.1 |
| Release Notes | v6.0.2 Fixes: -Fixed issues connecting to Hue for some users. v6.0.1 Fixes: -Fixed "Hue Entertainment Starting" popup not showing on first app launch. -Fixed visualizer not starting on first press after install. -Updated LIFX library. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Now you can play the bass drum with your foot. The most realistic 3D drum app.
| New version | 1.4.5 |
| Old version | 1.4.4 |
| Release Notes | - This update is huge for the DrumKnee 3D PRO users. Added functionality to add Drum Pads to the screen and assign any drum sounds. You can move them anywhere and also can change its size. Free users can add 1 drum pad. - Fixes an issue that was causing DK Music subscribers to continue loading ads in the background. - Ads performance improvement - Top banner ads won't impact drumming experience anymore. - Improved experience for iPhone X users - Fixes an issue while using the realistic positioning mode - Increased the drum set tuning range - samplers can go even lower/higher - Translation to Simplified Chinese |
| Author | Music4Fun LLC |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Audiobus |
With Audulus, you can build synthesizers, design new sounds, or process audio. All with low latency real-time processing suitable for live performance.
| New version | 3.5.1 |
| Old version | 3.5 |
| Release Notes | - UI fixes for iPhone X. - Updated module library: hundreds of new and improved modules, including analog modeling VCFs and VCAs, new effects like the Icebox Audio Freezer, and many new useful module building utilities. - Performance improvements. |
| Author | Audulus LLC |
| Type | Instrument, Effect |
| Instrument sounds | All-in-one |
| Effect type | All-in-one |
| Supports | Audiobus |
Zeeon is a virtual analog synthesizer, powered by an advanced analog circuit modeling engine.
| New version | 1.52 |
| Old version | 1.51 |
| Release Notes | Fixed: synth interface not showing in stand-alone mode |
| Author | BeepStreet |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Audio Unit (AU) |
Samplist is a MIDI Sampler Instrument which allows you to easily chop a sample into different slices.
| New version | 1.3.8 |
| Old version | 1.3.7 |
| Release Notes | • Bigger pads on iPhone. You now have 8 big pads on the iPhone instead of 16 small ones. But don't worry, you can still page through them and have access to all 64 • Fixed lost sound when receiving a call or notification and going back to Samplist. • Now when you trim a slice to a new sample, it retains the file's original name. Ex: "Beat-Slice-1.wav" instead of "Slice-1.wav" • Fixed tempo calculation when using sample rates different than 44100. • Various bug fixes & improvements. |
| Author | Cristina Buga |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Inter-App Audio (IAA), Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.2 |
| Old version | 6.0.1 |
| Release Notes | v6.0.2 Fixes: -Fixed issues connecting to Hue for some users. v6.0.1 Fixes: -Fixed "Hue Entertainment Starting" popup not showing on first app launch. -Fixed visualizer not starting on first press after install. -Updated LIFX library. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Xequence is an advanced linear MIDI Sequencer and Keyboard / Controller for iPhone and iPad.
| New version | 1.7.1 |
| Old version | 1.7 |
| Release Notes | POLYHYMNIA: - Added 5 new waveforms for improved versatility. - Waveforms can now be multiplied instead of added (new buttons above "Offset" slider) for significantly enhanced flexibility (please see the manual for more details). - LEDs use separate colors for positive and negative values. - Improved auto-generation of settings. - More correct undo descriptions. - Various optimizations. FIXES: - Fix keyboard not coming up automatically when entering values. - PolyHymnia: Fix occasional mixup of Repetition and Complexity sliders. - PolyHymnia: When opening, polyphonic sequences sometimes were not recognized as previously generated and a bogus new sequence was added. - PolyHymnia: Fix generation of notes sometimes stopping before the end of the loop / part - PolyHymnia: Fix sawtooth and Sample & Hold waveform period / phase to be consistent with other waveform types and with their icons. And here's the rest of the 1.7 changes in case you've missed them: INTRODUCING POLYHYMNIA: PolyHymnia is a very musical, engaging and fun generative music module right inside the Pianoroll editor. Find it in the new "+" menu in the bottom toolbar (which also contains the new Clipboard options). - Advanced, fully configurable algorithms. - Separately editable generators for note pitch, length, distance, velocity, and polyphony. - Single notes or chords with adjustable, intelligent polyphony. - Sophisticated one-tap auto-generation of algorithm settings, either global for all note characteristics, or separately for pitch, length, distance or velocity. - Visual selection of desired pitch range by simply zooming / scrolling in the Pianoroll editor. - Fully live and interactive, all parameter changes reflected immediately. - All PolyHymnia settings automatically stored and recalled per part: generated melodies and their settings can be edited at any later time. - Full Undo and Redo for all PolyHymnia parameter edits. - Live visualization of algorithms with LEDs. NEW: - Pianoroll: Global Clipboard support. Notes and controller data can now be copied and pasted between arbitrary positions inside a part, between parts, or even between projects. Accessed via the new Clipboard ("+") menu in the bottom left corner of the Pianoroll editor. - Keyboard / Drum pads: Much better handling of key and drum pad retriggers: When a key or drum pad is touched with a second finger while the first is still touching it, the current note will be sliced (triggered again) at that point. - Files can now be sorted by date. IMPROVEMENTS: - Keyboard: In "Key slide" control mode, recorded controller data is now left unquantized by default. - Note velocities are now visible for selected notes (different shades of grey). - "Insert empty part" now uses the loop points if the song loop is active. - Better MIDI response when editing notes while playhead is moving. - The "+" button next to the rightmost instrument on the instruments screen now adds the new instrument with default settings, not with the settings of the rightmost instrument. - General performance and user interface improvements. FIXES: - Fix problem with deleting soloed tracks. - Fix jumping controller values when multiple controllers were in "Slide" mode. |
| Author | Seven Systems Cross-Platform Media Limited |
| Type | Controller |
| Supports | Audiobus |
PlaySections is an audio/video player that allows you to freely set marks and play back specific sections of your audio/video files.
| New version | 2.9.4 |
| Old version | 2.9.3 |
| Release Notes | - Fixed an issue where the play button doesn't work when playing DRM contents (Apple Music) on iOS 11.3 (due to the new bug introduced in iOS 11.3...) - Disabled the speed control when playing DRM contents on iOS 11.3 (due to the new bug introduced in iOS 11.3...) - Fixed an issue where the loop button doesn't work properly when playing DRM contents |
| Author | Hiroshi Kajihata |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audio Unit (AU) |
Navichord is a modern MIDI controller, working with software and hardware synths.
| New version | 2.6.7 |
| Old version | 2.6.6 |
| Release Notes | Workflow improvements - Voicing is preserved when changing chord root from the chord picker - Midi out notes sorted by pitch (Voice1 contains lowest note) - Chord octave control made visible in Pads mode for iPad - Added audio latency control (set to maximum to avoid audio artifacts) Other - Added new purple theme - Switched to standard app review dialog Bugfixes - Fixed color theme not restored on startup - Fixed MIDI Learn not always working properly - Improved MIDI message handling - Improved stability |
| Author | Denis Kutuzov |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus, Ableton Link |
Jam Maestro is a powerful music composition tool for musicians interested in making guitar-centric music.
| New price | $4.99 |
| Old price | $8.99 |
| Author | David Blake |
| Type | Instrument, Tool |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion, Guitar, Bass |
| Supports | Inter-App Audio (IAA), Audiobus |