Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.6 |
| Old version | 6.0.5 |
| Release Notes | v6.0.6 Fixes: -Fixed Visualizer skipping some lights with Hue Entertainment. -Fixed iPhone New Effect button not showing while disconnected. -Fixed iPad graphics glitching. -Fixed iPad autoplay not recognizing effect reorganization. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Castamatic is the app to listen to podcasts on any iOS device.
| New version | 3.1.6 |
| Old version | 3.1.5 |
| Release Notes | Version 3.1.6 - Fix for random hangs in CarPlay interface - Fix for crash importing shows with malformed descriptions Version 3.1.5 - Fix for connection error browsing podcast directory Version 3.1.4 - Fix for duplicate episode appearing after feed refresh. Version 3.1.3 - Automatically switch from streaming to playing local file when the file has completed downloading in the background. Version 3.1.2 - Small bug fixes Version 3.1.1 - Progress indicator for current chapter - Fixed bug in iCloud sync causing finished episode not being synced as listened Version 3.1 - Display chapter artwork and links if available - Two finger swipe gesture to switch theme - Fixed bug preventing turning off screen while playing - Bug fixes for Today Widget - Bug fixes for Car Play Version 3.0.7 - Bug fixes Version 3.0.6 - m4a files that are not optimized for streaming are now supported - Improved support for iOS 11 Version 3.0.5 - Fix for malformed RSS feeds causing abnormal data transfer Version 3.0.4 - Fix for crash reading malformed chapter titles Version 3.0.3 - Parser for chapters in m4a files - Fix for disappearing artwork in the Widget - Fix importing feeds with capital letters in the url - Minor fixes Version 3.0 - Playlist icons - CarPlay - Dark theme with auto-switch based on ambient light - Big miniplayer with podcast artwork - Improved chapters view - Apple Watch Complication - 0.5x play (will be 0.75x in final release) - New booster effect - Improved leveler effect - New player UI with bigger progress slider - Universal sharing with web component - Today Widget Extension - Improved notifications with more options (add to On the Go...) - Progress indicator when importing from opml or iCloud - Improved factory reset - Customizable REW/FWD intervals - Adaptive pre-wind - Disabled shows (not updating for user request) - Inactive shows (no episodes in the last 2 months) - Podcast directory - Ads - New app icon (coming soon) - Episode specific artwork - Sync improvements: - Sync effect settings for each podcast - Sync currently loaded episode (not yet implemented) - Increased feed parsing speed - Increased opml import speed - Improved database performance |
| Author | Gunp Media Productions |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audio Unit (AU) |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.6 |
| Old version | 6.0.5 |
| Release Notes | v6.0.6 Fixes: -Fixed Visualizer skipping some lights with Hue Entertainment. -Fixed iPhone New Effect button not showing while disconnected. -Fixed iPad graphics glitching. -Fixed iPad autoplay not recognizing effect reorganization. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
AAS Objeq transforms those beats to sound closer to a real percussion instrument.
| Author | Applied Acoustics Systems DVM Inc. |
| Type | Controller |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Audiobus, Audio Unit (AU) |
The Minimoog Model D App is a mobile transmutation of the world’s first portable synthesizer, the Minimoog Model D®.
| Author | Moog Music Inc. |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus, Audio Unit (AU), Ableton Link |
Now you can play the bass drum with your foot. The most realistic 3D drum app.
| New version | 1.4.6 |
| Old version | 1.4.5 |
| Release Notes | - Improved recording experience. - Improved layout for iPhone X - Added a third positioning mode - Ergonomic 2 - available for iPhones only - Both right kick drum and right hi-hat were switched. - Fixes a conflict with Siri. - Many more bug fixes. Please send your bugs to the DrumKnee 3D Facebook page. ~Paulo |
| Author | Music4Fun LLC |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Audiobus |
StompBox turns your iPad into a flexible Multi FX Processor, it includes many effects plus a Recorder and Media Player.
| New version | 1.53 |
| Old version | 1.52 |
| Release Notes | Fixed an issue with Push Notifications. Removed the Latest News option. Minor Bug Fixes. |
| Author | 4Pockets.com |
| Type | Effect |
| Effect type | Guitar effects, Bass effects, All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.5 |
| Old version | 6.0.4 |
| Release Notes | v6.0.5 Release: -Fixed Hue Manual Connection keyboard for international users. -Minor bug fixes. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
PlaySections is an audio/video player that allows you to freely set marks and play back specific sections of your audio/video files.
| New version | 2.9.5 |
| Old version | 2.9.4 |
| Release Notes | Fix an issue of importing from other apps through "Copy to PlaySections" menu |
| Author | Hiroshi Kajihata |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Audio Unit (AU) |
Scythe is a synthesis engine. The controls have been minimised to allow a simple workflow with the same complex modulation that you might be used to.
| New price | $5.99 |
| Old price | $6.99 |
| Author | Sonic Sector Ltd |
| Type | Instrument |
| Instrument type | Synth |
| Instrument sounds | Keyboards |
| Supports | Inter-App Audio (IAA), Audiobus |
The 6144 is an Audio Unit equalizer which aims to recreate the legendary sound of the Neve hardware EQs.
| New version | 1.2.5 |
| Old version | 1.2.3 |
| Release Notes | - added Inter-App-Audio support - stability improvements and build for latest iOS 11.3 SDK |
| Author | Christian Siedschlag |
| Type | Effect |
| Effect type | Equalizer, Filter |
| Supports | Audio Unit (AU) |
StompBox Lite turns your iPad into a flexible Multi FX Processor which comes with 3 free effects; Delay, Reverb, Chorus and a further Effects to choose from in the Online store.
| New version | 1.53 |
| Old version | 1.52 |
| Release Notes | Fixed an issue with Push Notifications Removed the Latest News option Minor Bug Fixes |
| Author | 4Pockets.com |
| Type | Effect |
| Effect type | Guitar effects, Bass effects, All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus |
Make beats easily in landscape or portrait, your choice.
| New version | 1.6.4 |
| Old version | 1.6.3 |
| Release Notes | * Bug fixes |
| Author | SoundWare, Inc. |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Drums, Percussion |
| Supports | Audio Unit (AU), Ableton Link |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.5 |
| Old version | 6.0.4 |
| Release Notes | v6.0.5 Release: -Fixed Hue Manual Connection keyboard for international users. -Minor bug fixes. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
Samplist is a MIDI Sampler Instrument which allows you to easily chop a sample into different slices.
| New version | 1.3.9 |
| Old version | 1.3.8 |
| Release Notes | • New on screen keyboard with velocity. • Added performance mode on iPhone. Tap the button and the controls get tucked away so you can focus on your performance. • Added Beat Grid Toggle. You can disable the grid in the tempo settings screen. • Slice tempo can be adjusted in small increments in the TimeStretch screen. • Various UI improvements & bug fixes Thanks again for using Samplist. Don't forget to add a review if you enjoy it. |
| Author | Cristina Buga |
| Type | Instrument |
| Instrument type | Sampler |
| Instrument sounds | Other |
| Supports | Inter-App Audio (IAA), Audiobus |
Connects to Philips Hue, LIFX, and Nanoleaf Aurora to interact with your lights in tons of different ways.
| New version | 6.0.4 |
| Old version | 6.0.3 |
| Release Notes | v6.0.4 Release: -Minor bug fixes. v6.0 Update Notes: -The app now fully supports Hue Entertainment. All of the app's effects have been updated. -Using a new Hue Entertainment area you'll enjoy high-performance effects; all of the app's effects respond faster and with better sync. Send waves of color across your room with the updated Groove Wave effect, or see faster strobes with the Matrix controller. The Visualizer is more responsive and active as well. -You will need to reconnect to your Hue bridge after upgrading. -Philips Hue v2 square (not round) bridge is required for Hue Entertainment effects. -The app now supports connecting to multiple bridges. You can combine lights from two or more bridges using the legacy effects or control multiple simultaneous entertainment areas. -Hue Entertainment groups can’t mix with LIFX lights as I don’t have the same location data and effect engine to keep everything synced. You can continue to mix Hue and LIFX using a local group with the ordered bulbs method to get the legacy effects. -You CAN combine Nanoleaf Light Panels with Hue Entertainment groups using a local group. -Custom effects aren’t compatible with the Entertainment API. You can continue to run them in legacy mode. -Visualizer mellow effect 'Soft Strobe' has been replaced with ‘Solid'. -While in Entertainment mode, iPad tapper buttons now control a section of the room rather than a single light (e.g. Front, Left, FrontLeft, All, etc.). If you’ve already created an entertainment area then these will auto-populate to All when you connect to your bridge the first time. To run the Hue Entertainment effects you’ll need to create an Entertainment Area from within the Hue app. Each entertainment area can contain up to 10 lights. A bridge can only support streaming to one active entertainment area at a time, but Light DJ Pro can control multiple areas simultaneously if you use a separate Hue bridge to control each area. |
| Author | NRTHRNLIGHTS, LLC |
| Type | Tool |
| Supports | Ableton Link |
StompBox Band - Dual Effect Racks for your iPad, specifically designed for Bands on a Budget and Guitarists who require a dual rack setup.
| New version | 1.08 |
| Old version | 1.07 |
| Release Notes | Fixed a push notification issue. Removed Latest News option. |
| Author | 4Pockets.com |
| Type | Effect |
| Effect type | Guitar effects, Bass effects, All-in-one |
| Supports | Inter-App Audio (IAA), Audiobus |
Envelope is a high class reverb audio unit for use as a standalone app or (preferably) in AUv3 hosts.
| New version | 1.0.6 |
| Old version | 1.0.5 |
| Release Notes | - added Inter-App-Audio support - stability improvements and build against latest iOS 11.3 SDK |
| Author | Christian Siedschlag |
| Type | Effect |
| Effect type | Reverb, Delay, Echo |
| Supports | Audio Unit (AU) |
Cotracks is a collaborative music studio for teamwork on a single iPad.
| New price | $8.99 |
| Old price | $89.99 |
| Author | Futucraft Oy |
| Type | Host, Instrument, Effect |
| Supports | Audiobus |
Cotracks is a collaborative music studio for teamwork on a single iPad.
| New version | 1.0.17 |
| Old version | 1.0.16 |
| Release Notes | Updated Audiobus and AudioCopy |
| Author | Futucraft Oy |
| Type | Host, Instrument, Effect |
| Supports | Audiobus |