BLEASS filter AUv3 AudioPlugin

Select by:
From
To
0.00
75.00
150.00
224.99
299.99
Follow us on twitter and get new apps, updates, price drops instantly.

All devices →

BLEASS filter is an essential tool for musicians: inspired by classic analog filters, it features an envelope follower as well as a LFO and a warm sound which create mind boggling filter sweep effects on any sound source: guitars, vocals, keyboards, drums ...

Price $3.99 $1.99
Author BLEASS
Type Effect
Effect type Equalizer, Filter, Modulation effects
Supports Audiobus, Audio Unit (AU)
Rating total: 5 (11), current: 5 (11)
Version 1.2
Released 06/20/2019
Updated 05/19/2022
Inspired by the vintage analogue filters found on the world’s most renowned classic synths, and wrapped in our trademark super-modern interface design, BLEASS Filter delivers a great sound along with an intuitive and tactile user experience. The plugin also provides detailed visual feedback that can be read and understood at a glance.

A static filter can be as dull as no filter at all, which is why we have included both an envelope follower and an LFO (Low Frequency Oscillator) in BLEASS Filter. The envelope follower can be tuned to perfectly match your audio, adding dynamic interest to your music, whilst the LFO creates repeating sweeps and movement that can run freely or sync to the beat.

With superb versatility, ultra-efficient processing, and a great price, BLEASS Filter is guaranteed to bring new character and interest to your audio, and a smile to your face!

USING BLEASS FILTER

___INPUT SECTION
Gain
Sets the volume of the incoming signal. This also impacts on the sensitivity of the envelope follower.

Sens
Controls the sensitivity of the envelope follower. This works in conjunction with the Gain setting to determine when, and host strongly, a new envelope cycle will be triggered.

Attack
Determines how quickly the envelope responds to peaks and transients

Release
Determines how quickly the envelope closes after the attack phase is complete.

Envelope
Controls the strength and polarity of the envelope’s impact on the filter’s cutoff frequency. Positive settings cause the envelope to increase the filter’s cutoff frequency, whilst negative settings will reduce the cutoff.

Meter
Visualises the activity of the envelope follower, making it easier to understand how it is responding to the input signal.

___FILTER SECTION

Filter Graph
The large on-screen graph gives an accurate readout of the filter’s current setup, and also allows you to change that setup: drag left and right to alter the cutoff frequency; drag up-and-down to increase or decrease the filter resonance.

Mode selection buttons
BLEASS Filter’s versatile multi-mode design offers a choice of low-pass, high-pass, band-pass and notch filtering.

X2 Button
Doubles-up the filter, accentuating the resonant frequencies and creating a sharper cutoff slope or, in the case of the notch filter, a wider notch.

___LFO SECTION

Sync
Chose between a free-running LFO, or one that is synced to the beat of your host DAW.

Waveform
Select the shape of the LFO. From top to bottom: sine, triangle, saw-tooth up, saw-tooth down, square, and sample-and-hold.

Rate
When running in FREE sync mode, sets the length of one LFO cycle in terms of seconds, from 16 seconds down to 50 milliseconds.

Sync Rate
When running in BEAT sync mode, sets the the length of one LFO cycle in terms of beat-and-note length, from 4 bars down to 1/32 note (that is, a demisemiquaver).

Offset
When running in BEAT sync mode, offsets the LFO’s phase, or starting point, in relation to the beat.

Stereo
Creates a phase offset between left and right channels of the LFO signal. At ±100%, the channels are fully offset, with one channel hitting its maximum value when the other reaches its minimum. At 0% the two channels remain locked together.

Amount
Determines how strongly the LFO signal impacts on the filter’s cutoff frequency.

Meter
The two-part bar meter provides an intuitive visualisation of how strongly the LFO is impacting on the filter’s cutoff frequency.

___MIX

Gain
Set the master output level of the plugin. Large resonance settings can result in particularly strong peaks, which can be tamed here.

Dry/Wet
Sets the balance between ‘dry’ input signal and ‘wet’ filtered signal. A setting of 100% means only the filtered signal will be heard.

___

BLEASS Filter is also available for Desktop
visit www.bleass.com for more information

Version 1.2 release notes

Now with filter modulation visualisation! Also available for Desktop. More information on www.bleass.com

More Apps by BLEASS (14)

BLEASS Motion FX contains 11 different effects which you can modulate precisely thanks to an intuitive and comprehensive sequencer.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Equalizer, Filter, Reverb, Delay, Echo, Modulation effects, Pitch effects, Other
Supports Audio Unit (AU)
Rating total: 4.8 (10), current: 4.8 (10)
Released 03/21/2021

BLEASS Slow Machine can deepen any beat by completely or partially slowing down the audio signal, transform epic leads into heavy basses, and add some “tape stop” effect with precision either by touching the X/Y Stop trigger, or by dialing in precise sequence automations

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Pitch effects, Other
Supports Audio Unit (AU)
Rating total: 4.66667 (12), current: 4.66667 (12)
Released 02/01/2021
Updated 02/02/2021

BLEASS Granulizer generates short samples (‘grains’) from different input signals by modulating different parameters which you can visualize thanks to a 3D Visualizer.

Price $7.99 $3.99
Author BLEASS
Type Instrument
Instrument type Synth
Instrument sounds Other
Supports Audiobus, Audio Unit (AU)
Rating total: 4.85714 (14), current: 4.85714 (14)
Released 01/02/2021
Updated 03/31/2021

This versatile saturation effect processor comes packed with 40 Factory Presets, from classic stereo Drive to crazy metallic bitcrushed Saturations.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Other
Supports Audiobus, Audio Unit (AU)
Rating total: 5 (4), current: 5 (4)
Released 11/28/2020

BLEASS Motion EQ is a 3-band equalizer with multi-outs and 2 LFOs.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Equalizer, Filter
Supports Audiobus, Audio Unit (AU)
Rating total: 5 (13), current: 5 (13)
Released 12/14/2020
Updated 06/02/2022

BLEASS Compressor is a tool for iOS musicians offering external sidechain input, input filters and real-time visualization with very low CPU usage.

Price $4.99 $2.99
Author BLEASS
Type Effect
Effect type Compressor, Limiter, Gate
Supports Inter-App Audio (IAA), Audio Unit (AU)
Rating total: 5 (6), current: 5 (6)
Released 11/10/2020
Updated 06/17/2022

BLEASS Flanger is a flanging effect offering a wide range of synchronised modulations which colours sound in a novel and unique way thanks to its complex algorithmic combinations.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Chorus, Flanger, Phaser etc.
Supports Audiobus, Audio Unit (AU)
Rating total: 5 (8), current: 5 (8)
Released 08/25/2020

BLEASS Chorus is a two-stage chorus effect that offers a full control of the stereo image as well as a large range of effects, from subtle stereo wideners to crazy texture generators.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Chorus, Flanger, Phaser etc.
Supports Audiobus, Audio Unit (AU)
Rating total: 5 (7), current: 5 (7)
Released 07/13/2020
Updated 07/22/2020

BLEASS Shimmer is an AUv3 compatible Shimmer Reverb Effect that brings harmonic tails to any sound or instrument with very low CPU usage.

Price $7.99 $3.99
Author BLEASS
Type Effect
Effect type Reverb, Delay, Echo, Pitch effects
Supports Audiobus, Audio Unit (AU)
Rating total: 4.94118 (17), current: 4.94118 (17)
Released 06/17/2020
Updated 06/17/2020

The BLEASS Alpha Synth is a virtual analog polyphonic stereo synthesizer inspired by classic analog synths and enhanced by the BLEASS’ very own musical and technical approach. 

Price $14.99 $7.99
Author BLEASS
Type Instrument
Instrument type Synth
Instrument sounds Keyboards
Supports Audio Unit (AU), Ableton Link
Rating total: 4.86047 (86), current: 4.86047 (86)
Released 02/02/2020
Updated 07/26/2022

The BLEASS sidekick AUv3 is the world's first iOS AUv3 effect plugin that offers a kick drum synth and sequencer coupled with a sidechain compressor in order to bring unique and creative dynamics to your music!

Price $7.99 $3.99
Author BLEASS
Type Instrument, Effect
Instrument type Synth
Instrument sounds Drums, Percussion
Effect type Compressor, Limiter, Gate, Other
Supports Audiobus, Audio Unit (AU)
Rating total: 4.63636 (11), current: 4.63636 (11)
Released 05/23/2019
Updated 04/07/2020

The BLEASS reverb is a reverb plugin.

Price $4.99 $1.99
Author BLEASS
Type Effect
Effect type Reverb, Delay, Echo
Supports Audiobus, Audio Unit (AU)
Rating total: 4.66667 (18), current: 4.66667 (18)
Released 04/10/2019
Updated 07/05/2019

BLEASS delay transforms your sounds into cinematic and experimental sonic experiences! It is constantly creating flux in the audio signal making your music even more lively.
BLEASS delay is also ideal for making track build-ups and transitions.

Price $4.99 $2.99
Author BLEASS
Type Effect
Effect type Reverb, Delay, Echo
Supports Audiobus, Audio Unit (AU)
Rating total: 4.67856 (28), current: 4.67856 (28)
Released 02/21/2019
Updated 09/18/2020

Fed up with standardized presets and instruments? Feel lost in overcomplex filters and effects? Don’t wanna sound like everyone else? BLEASS is just the right instrument for you: it unleashes your inner musical creativity by bringing music production and performance to its very core: play, perform, compose beats and melodies in a new yet intuitive way thanks to its multitrack sequencer, synthesizer and drum machine.

Price Free
Author BLEASS
Type Instrument
Instrument type Synth
Instrument sounds Keyboards
Supports Inter-App Audio (IAA), Audiobus, Ableton Link
Rating total: 4.42856 (28), current: 4.42856 (28)
Released 10/28/2018
Updated 04/22/2020